Engineered floors have many advantages over traditional hardwood floors. They are easy to install, require no sanding and polishing, and will last a lifetime. However, some engineered floors can be more costly than traditional hardwood floors. It’s important to look at all of your options when you’re selecting flooring. You can save money by choosing a less expensive option, such as laminate or vinyl.

What are the benefits of hardwood flooring?

Hardwood floors can last a lifetime, if you choose the right type of timber.. Hardwood floors are also very durable, easy to clean, and look great.

When cleaning your hardwood floors, use only clean, dry hands. Cleaners containing oil, wax, or abrasives will dull the finish and damage the floor. Follow the manufacturer’s recommendations for using a specific cleaner on your type of floor. Use a soft, clean rag or brush to scrub off any dust or dirt that has accumulated on the floor. After cleaning your hardwood floors, apply a protectant such as Shellac to provide a barrier against scratches. If your hardwood floors receive a lot of traffic, they may need to be sealed with a protective sealer. When cleaning your hardwood floors, use only clean, dry hands.

After cleaning your hardwood floors, apply a protectant such as Shellac to provide a barrier against scratches. If your hardwood floors receive a lot of traffic, they may need to be sealed with a protective sealer.

We recommend Loba Floor cleaner.

Sanding and Polishing Timber Floors Most people know that sanding is an important part of finishing a new floor, but few actually understand how to do it. Sanding should be done in several stages: First, remove the old finish with a power sander. This removes the top layer of dirt and debris.

1. Then, using a power sander, scuff the floor to loosen up the old finish and make it more receptive to polishing.
2. Finally, use a fine-grit, low-speed abrasive to polish the floor. The floor should be scuffed every two hours and polished about once a day. If you plan to use a pad to polish the floor, do not use abrasive pads.
3. Sanding can be performed by hand or with a power sander. You should only sand the floor with a power sander if it is at least 5/8″ thick, otherwise it will flex and cause problems in the long run.

Two types of floor finishes can be used on most timber floors:

1. Polyurethane floor finishes are the most widely used today. They are available either in either single or “two pack” formulations. Once dry, polyurethane finishes are perfectly safe, but their fumes are highly toxic. Wear protective gloves and eyewear and a respiratory device approved for use with toxic chemicals. Make sure the area is well ventilated both while you are applying the polish and afterwards.

    

2. Oil based resins remain a popular option. They are not as hard wearing as polyurethanes, but pose less health hazards.

Floor finishes come in matt, semi-gloss or gloss finishes. A high gloss finish looks great, but is not advisable for high traffic floors: it highlights scratches and  imperfections. Once you have chosen the type of finish you want to use, follow these steps for best results

List the price ranges (sqm) of your top 5 timber products: Laminate From $20m2

Hybrid From $30m2

Engineered timber From $55m2

Solid Timber From $80m2

Spotted Gum timber floors can be cleaned in a relatively straightforward manner, which is crucial if you want to keep your flooring looking as good as new for as long as possible. Regular sweeping and vacuuming can help to prevent grit and filth from acting as a form of sandpaper on your timber flooring, which can be detrimental. When utilising a timber-safe floor cleaner, damp mopping can provide a more thorough clean on a less frequent basis.

The finish of your spotted gum timber flooring can be damaged by the use of abrasive cleansers and harsh chemicals. As a general guideline, avoid using these products on your indoor timber flooring and do avoid steaming as well. 

We recommend using the Loba Floor cleaner together with warm water and mop.

Price per sqm from $40m²

Timber flooring comes in many different varieties and can be found in many different colors and styles. It is easy to maintain. There are no chemicals, oil products or solvents required to clean it.
Durable – Most timber floors have a lifespan of up to 50 years. They are very long lasting and can be used without any maintenance for many years. Timber flooring does not need regular care like carpets and does not require cleaning. It is also easy to keep clean and free from dirt.

Beautiful – A timber floor will look beautiful and warm in your house. It will bring a classic touch to the interiors of your home and make you feel happy.

You will have to pay higher cost than other flooring types but the end result will make your money worth. The advantage of timber floor is that, you get to enjoy a natural look with no damage. It’s also good for health as it’s natural and also non-toxic. You can also use them in bathrooms. They will help you to conserve energy as they do not have any heat conductivity. They are also very durable. If you want to maintain the appearance of your house, timber flooring is the best option.

Timber floors are very strong and durable. They are also good for your health as they have a lot of nutrients and antioxidants which are very good for your health.

Flooring innovation has reached a new level with hybrid flooring, which combines the best characteristics of both laminate and vinyl to produce a hard floating floor that can be put across an entire home. Hybrid flooring is made up of numerous layers of materials that have been mashed together to create an incredibly hard wearing surface.

Hybrid Flooring Benefits:

• Hybrid is extremely hard wearing, making it a great choice for kitchens and bathrooms 
• Hybrid can be installed in any room of the home.
• It is easy to install and can be finished quickly with minimal hassle.
• Hybrid flooring is affordable and has a longer lifetime than vinyl. 
• Hybrid can be installed as a floating floor. • Hybrid flooring is available in many styles and designs. 

Check our hybrid flooring range here

There are a variety of factors to consider before installing Engineered hardwood floors over concrete, even though it is possible. Installing timber flooring over your slab foundation may be a fantastic idea if the slab is properly prepared and the floor is placed by a qualified professional. Melbourne FLoors Mart has years of expertise in this procedure and understands exactly what has to be done to guarantee that your slab is suitable for hardwood flooring installation. Contact us now to learn more. The installation of new hardwood floors in your house is certain to be a success with the assistance of our knowledgeable staff. Make use of our expertise to install your new timber flooring.

You can lay engineered timber, laminate and hybrid products over tiles, provided that the sub-floor is leveled and flat.

Absolutely you can sand engineered timber flooring. Provided they veneer layer is thick enough.

When compared to laminate flooring, which cannot be sanded back, engineered timber floors have a true timber “wear layer” on top, which allows them to be sanded back several times and refinished several times.

We offer high-quality engineered timber flooring that is constructed from multiple layers of laminated hardwood that are tightly arranged in a cross-layer structure to form what is known as a ply-wood. The solid layer of hardwood on top is re-sandable multiple times and can be refinished with any oil or lacquer of your choosing. So when it comes to redecorating, there is no need to replace the carpet or laminate entirely; simply sand back the solid timber wear layer and re-finish with a finish that complements your new design instead!

How much does it cost to install timber flooring?

Laminate, hybrid and timber flooring range 8mm-21mm

The majority of hardwood flooring scratch repair may be handled with a little elbow grease, a small container of stain, and a fine-grit sandpaper, among other supplies. A small quantity of stain should be applied to the timber after it has been sanded in one direction only. For those who are apprehensive about using stain, walnut is a good choice. It is the oily brown dye found in walnuts that may be used to patch scratches in hardwood floors and improve the appearance of worn areas. Set aside for a few minutes, then buff with a clean towel to remove any remaining oil.

There are a variety of scratch-reducing treatments that may be applied with a cloth with no difficulty. A similar effect to the walnut dye is achieved by filling in the lighter coloured scratches. It doesn’t matter which product you use, these hardwood floor scratch removers make it nearly impossible to identify the original scratches on your hardwood flooring. You can reach out to us if you’re apprehensive about completing this process on your own time.

Despite the fact that engineered timber flooring is more durable than regular timber flooring, it is nevertheless susceptible to scratching. High-traffic locations are where you’ll see this most commonly. The use of a wax-based repair product designed exclusively for engineered flooring can help you fix scratches on your floors. It is possible to find a wide variety of brands. It’s important to check the label to ensure that it’s appropriate for your flooring, or you can call us for advice.

The filler will be pushed into the scratch with the help of a putty knife during this step. It will make the scratch very imperceptible, if not completely undetectable, in most cases. Remember to carefully read the label and directions before using any products!

Remove paint from the timber flooring while it is still wet as once the paint has dried, it must be scraped or dissolved with a solvent, which is time-consuming and ineffective. The removal of oil-based paint is more difficult than the removal of latex paint because oil-based paint is harder to remove, and the solvents used to dissolve it might harm the floor finish. You should always try other methods of paint removal before resorting to solvents, whether the paint is water-based or oil-based.

We recommend using rubbing alcohol, denatured alcohol, a paint removing solvent, paint thinners, or cleansing pads. Or the easiest is to just apply Loba Floor Care remover

Engineered hardwoods that have been properly treated are water resistant, but they are not waterproof. However, this does not rule out the possibility of using them throughout the house. They are truly a fantastic flooring option for practically every area in the house. It is water resistant as long you take care of the floor it will be safe to lay in the kitchen.